NEW MODEL

U41 - Promotion. Click here!!!

© 1997-2008 Tan Chong Industrial Equipment Sdn Bhd.
All rights reserved.
Legal Notices
Privacy Policy


 

PKD214R
GVW : 18,500 KG

Specifications


PERFORMANCE 

Minimum Turning Radius : 10.0 m 
Maximum Speed and Gradeability @ 18,500 kg
Maximum Speed km/h
103
Gradeability (tan Ø)
0.357
Transmission
MPS62T
Final ratio
5.571

ENGINE
Make and Model  NISSAN DIESEL MOTOR FE6TC DIESEL ENGINE
Type  Euro 2, 4-cycle, direct-injection, water-cooled, in-line turbo charged with intercooler diesel engine.
Number of Cylinders 6
Bore x Stroke 108 mm x 126 mm
Total Piston Displacement 6,925 cc
Max. Output(JIS) 258 PS at 2,800 r.p.m
Max. Torque(JIS) 72 k.g-m. at 1,800 r.p.m
Max. Engine Speed 3,000 r.p.m
Compression Ratio 17.5 : 1
Lubrication System Forced feed by gear pump
Cooling System Forced circulation by centrifugal water pump
Fuel System 
- Fuel Injection Pump 
- Governor

Bosch A-type in-line plunger
REDS electronic type
Air Cleaner Dry paper element type
Electrical Equipment
- Generator
24-volts system, negative earth
24 volts - 40 amp. alternator

CHASSIS 
Clutch Dry single plate, (Ø 380mm), hydraulically operated clutch release mechanism with air assisted booster
Front Axle Reverse Elliot "I" beam
Rear Axle 
- Final reduction gear
Full floating, pressed steel banjo housing
Single reduction, hypoid gear
Steering With hydraulic power assistance
Service Brake (foot brake)
- Front
- Rear
Full air brake,dual line system
Internal expanding leading and trailing shoe type
Internal expanding leading and trailing shoe type
TRANSMISSION 
Make and Model NISSAN DIESEL MOTOR MPS62T
Type Six forward speeds and one reverse, synchromesh on 2nd, 3rd, 4th, 5th & 6th gear, Constant-mesh on 1st. and reverse gears
Gear Ratios  
1st 9.008
2nd 5.483
3rd 3.196
4th 2.056
5th 1.398
6th 1.000
Rev 9.022
Gear Shift  Mechanical remote control
P.T.O.(OPT) Attached on the left side of gear box
Parking Brake (hand brake) Pneumatically controlled spring brake,operated by gradual type hand control lever, acting on rear wheels
Front Springs

- Width x Span

Semi elliptic leaf springs with anchor at front and shackle at rear, telescopic type shock absorbers.
80 mm x 1,400 mm
Rear Springs

- Width x Span
Semi elliptic two stage leaf springs with anchor at front and shackle at rear.
Main 80 mm x 1,400 mm
Helper 80 mm x 980 mm
Shock Absorbers Telescopic type on front axle
 
WHEELS & TYRES 
- Tyres
- Rim
- Spare Wheel
295/80R 22.5 16 ply
Pressed steel disc type 8.25 x 22.5 - 165 JIS 10 studs
One spare wheel / tyre with wind-up carrier
 
FRAME 
Frame
- Dimensions
Ladder type, consist of channel type side member
250 mm x 80 mm x 8 mm
Fuel Tank Capacity 300 litres rectangular tank
 
ELECTRICAL EQUIPMENT  
- Battery
- Headlights
65 AH, 12 volt x 2
Halogen headlight and fog light made as a single unit
 
OTHERS 
Others Taillight, stop light, license light, turn signal, back-up light, horn.
CABIN 
Type Forward control, all steel welded construction tilting cab
Instruments
- Meters
 
 

- Warning Lights and Buzzers  

 


Speedometer with odometer and trip meter, fuel gauge, water temperature gauge, air pressure gauge, tachometer.


Low engine oil pressure warning light, parking brake warning light, exhaust brake warning light, direction and headlight high beam indicator warning light, battery charge warning light, hazard warning light, low air pressure warning light and buzzer. 

WEIGHT (KG) 
Chassis with Cab 
4,640
- On Front Wheels
2,670
- On Rear Wheels
1,970
Permissible Gross Vehicle Weight
18,500 
Permissible Front Axle Load
6,500
Permissible Rear Axle Load
12,000

ATTACHMENT
Tools
NISSAN DIESEL standard tools (1set)


OTHERS
Items
STD
Exhaust Brake
Tilt / Telescopic Steering
Fog lights
Reverse warning buzzer
Cigarette lighter (24V)
Air cleaner clog warning indicator
Headrest on seat
Sun visor
Air Dryer
Rearview Mirrors