NEW MODEL

U41 - Promotion. Click here!!!

© 1997-2008 Tan Chong Industrial Equipment Sdn Bhd.
All rights reserved.
Legal Notices
Privacy Policy


 

LKC214N
GVW : 11,500 KG

Specifications


PERFORMANCE 

Minimum Turning Radius : 9.7 m 
Maximum Speed and Gradeability @ 11,500 kg
Maximum Speed km/hr
136
Gradeability (tan Ø)
0.401
Transmission
MLS62B
Final ratio
5.571

ENGINE
Make and Model  NISSAN DIESEL MOTOR FE6TA DIESEL ENGINE
Type  Euro 2, 4-cycle, direct-injection, water-cooled, turbo charged with intercooler.
Number of Cylinders 6
Bore x Stroke 108 mm x 126 mm
Total Piston Displacement 6,925 cc
Max. Output(JIS) 213 PS at 2,800 r.p.m
Max. Torque(JIS) 60 k.g-m. at 1,800 r.p.m
Max. Engine Speed 3,200 r.p.m
Compression Ratio 17.5 : 1
Lubrication System Forced feed by gear pump
Cooling System Forced circulation by centrifugal water pump
Fuel System 
- Fuel Injection Pump 

- Governor

In-line plunger with electronic control timer (MD-TICS)

Mechanical Governor (RLD-J)
Air Cleaner Dry paper element type with cyclone
Electrical Equipment
- Generator
24-volts system, negative earth
24 volts - 40 amp. alternator

CHASSIS 
Clutch Dry single plate, hydraulically operated clutch release mechanism with air assisted booster
Front Axle Reverse Elliot "I" beam
Rear Axle 
- Final reduction gear
Full floating, pressed steel banjo housing
Single reduction, hypoid gear
Steering With hydraulic power assistance
Service Brake (foot brake)
- Front
- Rear
Dual line air-over hydraulic brakes
Internal expanding two leading shoe type
Internal expanding dual two leading shoe type
TRANSMISSION 
Make and Model NISSAN DIESEL MOTOR MLS62B
Type Six forward speeds and one reverse, synchromesh on 2nd, 3rd, 4th, 5th and 6th gear, constant-mesh on 1st and reverse gears.
Gear Ratios  
1st 6.718
2nd 4.031
3rd 2.303
4th 1.443
5th 1.000
6th 0.740
Rev  6.121
Gear Shift  Mechanical remote control
P.T.O.(OPT) Attached on the left side of gear box
Suspension

- Front Springs


Semielliptic leaf springs with anchor at front and shackle at rear
Width x span
- Rear springs
70 x 1,300 mm
Semielliptic two-stage leaf springs with anchor at front and shackle at rear.
Width x span
Main 70 x 1,300 mm
Helper 70 x 980 mm
Shock Absorbers Telescopic type on front axle only
Wheels and tyres
- Tyres
- Rim

- Spare wheel

8.25 x 20 - 14 ply
Pressed steel disc type, 6.50T x 20, JIS 8 studs
One spare wheel and tyre with wind-up carrier
Frame Ladder type, channel section side member
Fuel tank capacity 150 litres with lokable fuel filler cap
Electrical Equipment
- Battery
- Headlights
65 AH, 12 volt x 2
Sealed beam, 4 lamps halogen headlight and fog light made as a single unit.
Others Taillight, stoplight, license light, side clearance light, turn signal, back-up light, horn
CABIN 
Type Forward control, all steel welded construction tilting cab with spring suspension & hydraulic shock absorbers
Instruments
- Meters

 
 

- Warning Lights and buzzers  

 


Speedometer with odometer and trip meter, fuel gauge, water temperature gauge, air pressure gauge, Tachometer.


Low oil pressure warning light, parking brake warning light, exhaust brake warning light, direction and headlight beam indicator warning light, battery charge warning light, hazard warning light, low air warning light and buzzer, cooling water level / overheat warning light and buzzer, low brake fluid level warning light and buzzer.

WEIGHT (KG) 
Chassis with Cab 
3,585
- On Front Wheels
2,280
- On Rear Wheels
1,305
Permissible Gross Vehicle Weight
11,500 
Permissible Front Axle Load
4,500
Permissible Rear Axle Load
7,500

ATTACHMENT
Tools
NISSAN DIESEL standard tools (1set)

OTHERS
ITEMS
STD
Exhaust Brake
Tilt / telescopic steering
Fog lights
Tachometer
Sun visor
Rearview mirrors
Air Dryer
Suspension Cabin
Suspension driver seat